Automatic Soap Dispenser Model 5460

Without burdensome work, your soap dispensers can be automated. Infrared sensor detects user’s hand. Good for sanitation. The dispenser ejects soap as much as is sufficient, so you can efficiently save soap. It is the best for public places such as hospitals, schools, restaurants, etc.


Specification

Power Supply AA Battery x 4 pcs., AC Adapter (separately sold)
Battery Life Approx. three months (when used 100 times/day)
Sensing Range Approx. 140 ± 20 mm from the sensing port
Ejection Amount 0.5~1.5ml
Operating Room Temperature +1 ~+55°C
Operating Water Temperature +1 ~ 50 °C (drinking water only, no freeze water)
Required Hole Size at Washstand φ25~ φ34 mm (use supplied baseplate for Φ29 mm or less hole size)

Thickness 35 mm or below
Installable Range A washstand which has a 60 mm or more clearance between the center of the install hole and the back face
Weight Approx. 600 g (excluding a bottle and batteries)
Soap viscosity 25~2000mPa・s
Dimensions 124.5 (H) x 70 (W) x 196 (D) mm (body component)

-->